XPress-Pro SW

Industrial Ethernet Switches

XPress-Pro SW Family
  • Managed and unmanaged rugged Ethernet switches
  • DIN-rail mountable
  • Compliant with IEC61000-6-2 EMC generic immunity standard for the industrial environment
  • Full wire-speed forwarding rate
  • Alarms for power failure by relay output (8-port only)
  • Fiberoptic interfaces

 

  • Overview
  • Order Info / Part #'s
  • Features & Specifications

Enabling Communication through Affordable Industrial Ethernet Switches

With a complete line of rugged, dependable, affordable Ethernet switches, the XPress-Pro™ SW series delivers a total networking solution for the industrial environment.

Part of the DeviceLinx™ family of network enablement products, XPress-Pro SW series managed and unmanaged Ethernet switches from Lantronix are designed to give you performance you can count on in the harsh environments often found at the edge of the network.

Whether they’re on the factory floor or in the field, XPress-Pro switches will provide flawless communication when you need it most. These full-featured Ethernet switches are the latest Lantronix innovations for the industrial automation marketplace.

XPress-Pro SW 94000 Series

XPress-Pro SW 94000 SeriesThe XPress-Pro SW 94000 is a managed Ethernet switch, allowing the user to log in and create virtual LANs, configure ports, mirror ports and more. SW 94000 switches deliver the flexibility of eight 10/100 Ethernet ports with an optional fiberoptic interface. XPress-Pro SW 94000 switches can be DIN-rail, shelf or wall mounted, and come with dual redundant power inputs via a terminal block.

  • 4K MAC addresses
  • 256 KB buffer memory
  • Redundant 2A max, 10 to 30 VDC power inputs
  • -34° to 74° C (-29° to 165° F) operating temperature range
  • Hardened aluminum case
  • Supports DIN-rail, panel, or rack-mounting installation
  • Complies with NEMA TS1 and TS2 environmental requirements for traffic control equipment
  • IEEE802.1w RSTP and IEEE802.1D STP compatible
  • IP multicast filtering through IGMP snooping
  • Supports port-based VLAN and IEEE802.1Q VLAN tagging and GVRP
  • IEEE802.1p QOS classification based on port-based priority, VLAN priority field in VLAN-tagged frame, DS/TOS field in IP packet, UDP/TCP logical ports
  • 8-port-based trunking groups with up to 8 ports per group
  • Rate control
  • Packet filtering and port security: destination MAC and static MAC address are not subject to aging; secure mode freezes MAC address learning
  • Port mirroring
  • Alarms for power failure by relay output
  • UL 1604: Class 1, Division 2 classified for use in hazardous locations

XPress-Pro SW 92000 Series

XPress-Pro SW 92000 SeriesXPress-Pro SW 92000 switches offer eight 10/100 Ethernet ports and an optional fiberoptic interface. They can be DIN-rail, shelf or wall mounted, and come with dual redundant power inputs to fit applications requiring a tough, environmentally hardened Ethernet switch.

  • 2048 MAC addresses
  • 768 kilobit buffer memory
  • Redundant 2A max, 10 to 48 VDC power inputs
  • Wide -34° to 74° C (-29° to 165° F) operating temperature range
  • Hardened aluminum case
  • Supports DIN-rail, panel, or rack-mounting installation
  • Comply with NEMA TS1 and TS2 environmental requirements
    for traffic control equipment
  • Alarms for power and port link failure by relay output
  • UL 1604 Class 1, Division 2 classified for use in hazardous locations

XPress-Pro SW 52000 Series

XPress-Pro SW 52000 SeriesThe XPress-Pro SW 52000 compact, fast Ethernet switches are equipped with 5-port 10/100Base-TX or 4-port 10/100Base-TX plus 1-port 100Base-FX networking. By using standard auto-negotiation and the inclusion of auto-MDIX, Lantronix delivers a cost-effective way of integrating legacy 10 Mbps networks with 100 Mbps fast Ethernet networks.

SW 52000 TX ports auto-negotiate for 10/100 Mbps speed and auto detect full or half-duplex mode. The fiber port on the SW 52012F accommodates multimode SC with a fiberoptic connection between two nodes that can reach up to two kilometers. SW 52000 series switches can be DIN-rail mounted and are equipped with terminal block power input to accommodate just about any application that requires an Ethernet switch.

  • 2048 MAC addresses
  • 384 kilobit buffer memory
  • .1A max, 12 to 48 VDC power input
  • -10° to 60° C (14° to 140° F) operating temperature range
  • Industrial plastic case supports DIN-rail mounting

XPress-Pro Industrial Power Supply

XPress-Pro SW Power Supply
Product Description 30W / 1.5A DIN-rail 24 VDC industrial power supply
Input 85 to 264 VAC (47 to 63 Hz) or 120 to 370 VDC
Output 36W, 24 VDC, 0 to 1.5A
Overvoltage Protection 27.6 to 32.4 Volts
Overload Protection 105 to 160% rated output power
Protection Type Constant current limiting, recovers automatically
Inrush Current 15A/115 VAC or 30A/230 VAC
Dimensions 78 mm W x 56 mm D x 93 mm H
( 3.17" W x 2.2" D x 3.66" H)
Environmental
Operating Temperature -20° to 60° C (-4° to 140° F)
Storage Temperature -40° to 85° C (-40° to 185° F)
Working Humidity 10% to 95% non-condensing
Storage Humidity 20% to 90% non-condensing
Regulatory Approvals:
Safety UL60950-1, TUV EN60950-1 approved, design refer to EN50178
EMI conduction & radiation EN55011, EN55022 (CISPR22) Class B
EMS immunity EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204, EN55024,EN61000-6-2, EN61204-3 heavy industry level, criteria A

Order Information & Part Numbers

RoHS logoLantronix products are available from a wide variety of leading technology vendors.
Click here to use our Partner Locator.

To speak with a Lantronix sales representative in North America, call +1 (800) 422-7055. For a full listing of Lantronix worldwide offices, please see our Contact Information page.

Part Number Description
X52000001-01 XPress-Pro SW 52000; Industrial -10 -60°C 5-Port 10/100TX Ethernet Switch with Din Rail
X52012011-01 XPress-Pro SW 52012F; Industrial -10 -60°C 4-Port 10/100TX, 1-Port 100BaseFX MM SC Connector Ethernet Switch with Din Rail
X92000001-01 XPress-Pro SW 92000; hardened -34-74°C 8-Port 10/100TX Ethernet Switch with Din Rail
X92012011-01 XPress-Pro SW 92012F; hardened -34-74°C 8-Port 10/100TX, 1-Port 100BaseFX MM SC Connector Ethernet Switch with Din Rail
X94000001-01 XPress-Pro SW 94000; hardened manageable -34-74°C 8-Port 10/100TX Ethernet Switch with Din Rail
X94012011-01 XPress-Pro SW 94012F; hardened manageable -34-74°C 8-Port 10/100TX, 1-Port 100BaseFX MM SC Connector Ethernet Switch with Din Rail
X3024DR00-01 30 Watts 24VDC output, hardened Din Rail power supply
Accessories
X9294DRKT-01 19" Rack Mount Kit for 94000 series
X9294PMKT-01 Wall Mount Kit for 92000, 94000 series

Features & Specifications

Designation 100Base-FX
Typical Distance 2 km
Nominal Wavelength 1310 nm
Cable Type 62.5 / 125 MM
Connector SC
Optical Budget 15 dB
Serial Interface
52000 5-port 10/100Base-TX or 4-port 10/100Base-TX plus 1-port 100Base-FX
92000 8-port 10/100Base-TX
94000 8-port 10/100Base-TX, plus 1-port 100Base-FX (optional)
Forward and Filtering Rate
52000 14,880 pps for 10 Mbps, 148,810 pps for 100 Mbps
92000 148,810 pps for 100 Mbps, 14,880 pps for 10 Mbps
94000 8-port 10/100Base-TX, plus 1-port 100Base-FX (optional)
Address Table Size
52000 2048 MAC addresses
92000 2048 MAC addresses
94000 4K MAC addresses
Latency
52000 Less than 5.1 μs
92000 Less than 7.1 μs
94000 Less than 9.6 μs
Reverse Polarity Protection
52000 n/a
92000 n/a
94000 Yes
Network Interface
52000 10/100 Mbps full/half-duplex, auto negotiation, auto MDI/MDIX
92000 10/100 Mbps full/half-duplex, auto negotiation, auto MDI/MDIX
94000 10/100 Mbps full/half-duplex, auto negotiation, auto MDI/MDIX
LED Indicators
52000 Per Unit: Power Status
Per Port: 10/100TX, 100FX:Link/Activity (Green), Speed (Yellow)
92000 Per Unit: Power Status (Power 1, Power 2)
Per Port: 10/100TX, 100FX:Link/Activity (Green), Speed (Yellow), Fault (Red)
94000 Per Unit: Power Status (Power 1, Power 2)
Per Port: 10/100TX, 100FX:Link/Activity (Green), Speed (Yellow)
Management
52000 n/a
92000 n/a
94000 RS-232 console, Telnet, SNMP V1 & V2, RMON, Web browser, TFTP
Alarm Contact
52000 n/a
92000 One relay output with current 1A @ 24 VDC
94000 One relay output with current 1A @ 24 VDC
Standards
52000 IEEE802.3 10Base-T, IEEE802.3u 100 Base-TX/100Base-FX, IEEE802.3x
92000 IEEE802.3 10Base-T, IEEE802.3u 100 Base-TX/100Base-FX, IEEE802.3x
94000 IEEE802.3 10Base-T, IEEE802.3u 100 Base-TX/100Base-FX IEEE802.3x, IEEE802.1Q, IEEE802.1p, IEEE802.1w
Power
52000 Input Voltage: 12 to 48 VDC
Input Current: 0.1A max.
Power Consumption: 2.4W max.
92000 Input Voltage: 10 to 48 VDC
Input Current: 1.5A max.
Power Consumption: 24 VDC @ 0.55A, 18.48 W max.
94000 Input Voltage: 10 to 30 VDC
Input Current: 2A max.
Power Consumption: 24 VDC @ 0.77A, 18.48 W max.
Environmental
52000 Operating Temperature: -10° to 60° ° C (-14° to 140° F)
Storage Temperature:-25° to 85° C (-13° to 185° F)
Humidity: 10% to 90% relative humidity (non-condensing)
92000 Operating Temperature: -34° to 74° ° C (-29° to 165° F)
Storage Temperature:-40° to 85° C (-40° to 185° F)
Humidity: 10% to 95% relative humidity (non-condensing)
94000 Operating Temperature: -34° to 74° ° C (-29° to 165° F)
Storage Temperature: -40° to 85° C (-40° to 185° F)
Humidity: 10% to 95% relative humidity (non-condensing)
Protocols Supported
52000 n/a
92000 n/a
94000 IGMP, GVRP, SNMP V1/V2, RMON,TFTP
Packet Buffer Memory
52000 384 KB
92000 768 Kb
94000 2 Mbytes
Packaging
52000 Plastic case with DIN-rail mounting
92000 Aluminum case with DIN-rail, or panel mounting
94000 Aluminum case with DIN-rail, panel or rack mounting
Dimensions
52000 25 mm W x 70 mm D x 110 mm H
(0.99" W x 2.76" D x 4.33" H)
92000 50 mm W x 110 mm D x 136 mm H
(1.97" W x 4.33" D x 5.35" H)
94000 50 mm W x 125 mm D x 135 mm H
(1.97" W x 4.92" D x 5.31" H)
Weight
52000 0.2 Kg (0.44 lbs.)
92000 / 94000 0.8 Kg (1.76 lb)
Processing Types
92000 Store-and-forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow control
94000 Store-and-forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow control
Standards
52000 / 92000 /
92000		 IEEE802.3 10Base-T, IEEE802.3u 100 Base-TX/100Base-FX, IEEE802.3x
Regulatory Approvals
Emission Compliance FCC Part 15, Class A
ISO 92000 / 94000: Manufactured in an ISO9001 facility
Safety 54000: UL 60950
92000 / 94000: UL 60950, EN 60950, IEC 60950, IEC 61000-6-2, UL 1604: Classified for ITE Equipment for use in hazardous locations: Class 1, Division 2 group A, B, C & D:Temp Code T4A; -25C° < Tamb < 74C°
CE Approval 54000: n/a
92000 / 94000: EN55022 (CISPR22 Class A), EN55024 (CISPR24 Class A)
ESD Standards (IEC 61000-4-2)
52000 n/a
92000 / 94000 Enclosure Contact: + / - 4 kV; Criteria B, Enclosure Air: + / - 8 kV; Criteria B
Radiated FRI Standards (IEC 61000-4-3)
52000 n/a
92000 / 94000 Enclosure Ports: 10 V/m, 80 to 1000 MHz; Criteria A
Burst Standards (IEC 61000-4-4)
52000 n/a
92000 / 94000 Enclosure Ports: + / - 4 kV @ 2.5 KHz; Criteria B, DC Power Ports: + / - 4 kV; Criteria B, AC Power Ports: + / - 4 kV; Criteria B
Surge Standards (IEC 61000-4-5)
52000 n/a
92000 / 94000 Signal Ports: + / - 1 kV; Line-to-earth; Criteria B, DC Power Ports: + / - 0.5 kV; Line-to-earth; Criteria B AC Power Ports: + / - 2 kV; Line-to-earth; Criteria B
Induced RFI Standards (IEC 61000-4-6)
52000 n/a
92000 / 94000 Signal Ports: 10V @ 0.15 - 80 MHz; Criteria A, DC Power Ports: 10V @ 0.15 - 80 MHz; Criteria A
AC Power Ports: 10V @ 0.15 - 80 MHz; Criteria A, Earth Ground Ports: 10V @ 0.15 - 80 MHz; Criteria A
Magnetic Field Standards (IEC 61000-4-8)
52000 n/a
92000 / 94000 Enclosure Ports: 30 A/m @ 50, 60 Hz; Criteria A
Voltage Dip Standards (IEC 61000-4-11)
52000 n/a
92000 / 94000 AC Power Ports: 30% Reduction for 0.5 period; Criteria B
Environmental Test Compliance
52000 n/a
92000 / 94000 (IEC 60068-2-6) Vibration Resistance: 5G @ 150 Hz; Criterion 3 (Operation/Storage/Transport)
(IEC 60068-2-27) Shock:
  • 5 G @ 11 ms (Half-Sine Shock Pulse; Operation)
  • 50 G @ 11 ms (Half-Sine Shock Pulse; Storage/Transport)
(IEC 60068-2-32) Free Fall: 1 M (3.281 ft.)
NEMA TS1/2 Environmental Requirements for Traffic Control Equipment
52000 n/a
92000 / 94000 Yes
Installation Type
52000 DIN Rail (mounting kit is included)
92000 DIN Rail (mounting kit is included)
Optional wall-mount kit, ordered separately (X9294PMKT-01)
94000 DIN Rail (mounting kit is included)
Optional wall-mount or rack-mount kit,ordered separately
(X9294DRKT-01), (X9294PMKT-01)

^ Back to Top